Magnetic Eyeliner

How to Apply Magnetic Liner

1. Prime your eyes (optional) and set with translucent powder or eyeshadow for longer wear.
2. Shake the Magnetic Eyeliner bottle and sweep the brush against the rim to remove excess.
3. Apply the liner in short, small strokes along your lash line, from inner to outer corner.
4. Let the liner dry for 3–5 minutes. Test dryness by lightly tapping with your finger—if no residue comes off, it’s ready.
5. Place your MoxieLash magnetic lashes close to the liner and let the magnets snap into place.

Tip: Rest your elbow on a table to steady your hand while applying. Note: Magnetic Eyeliner should be removed daily after each use.

How to Remove Magnetic Liner

• Use our All-In-One Makeup Remover, All-Gone Remover, micellar water, or an olive oil–infused cotton swabbie.
• Apply to a clean cloth or remover pad and hold against the liner for 10–15 seconds.
• Gently wipe away. For stubborn spots, let the remover soak a few seconds longer before wiping.

Tips for Best Results

• Apply mascara and other eye makeup before applying Magnetic Liner.
• Work in front of a mirror for precision.
• Keep the liner tight along your lash line so lash magnets have full contact.
• Some users like to draw a wing with regular eyeliner first, then trace over it with Magnetic Liner for easier control.

Clumpy Magnetic Liner

• Because our liner contains iron oxide, the magnetic particles may naturally clump.
• Simply shake the bottle (like nail polish) before use to smooth it out.
• Always let the liner dry completely before applying lashes (use the “dry test” by tapping with your finger).

Safety & Ingredients

• Contains iron oxide, but is free of parabens and heavy metals.
• Rated safe by the EWG, and generally suitable for sensitive eyes and contact-lens wearers.
• Long-wearing and water-resistant (sweat-proof), but not designed for swimming or heavy water exposure.
• Remove daily for best results and lash health.